DOWNLOAD M120 PRODUCT SHEET

M120 Welded Rail Clip

Two-part welded crane rail clip with weldable forged steel base and replaceable clip top. Friction connection suited to medium to heavy duty crane rail installations. No minimum order.

Welded Rail Clip

M120 Two-Part Welded Crane Rail Clip

The M120 is a two-part welded crane rail clip consisting of a replaceable clip top and a lower weldable forged steel base. The two components interlock, slide and tighten together to clamp the rail foot securely to the supporting structure. The base is welded to the beam or sole plate during installation.

The M120 is designed and performs as a friction connection, meaning it relies on clamping force to transfer lateral loads. It must be carefully tightened to the prescribed torque. Compared to the M71, the M120 is suited to medium to heavy crane rail profiles where higher lateral load capacity is required.

The clip top incorporates a vulcanized synthetic pressure block for rail retention and load absorption. The modular pressure block can be replaced without replacing the entire clip top assembly, reducing long-term maintenance cost.

M120 two-part welded crane rail clip supplied by Inform Rail Australia
Welded
Clip Type
2-Part
Design
Friction
Connection
Torqued
Installation
Replaceable
Pressure Block
Compatible Rail Profiles

Rail Profiles the M120 Suits

The M120 is suited to medium to heavy crane rail profiles from A65 through to A150, as well as heavy standard rail. It also suits MRS series crane rail profiles used in port and heavy industrial applications. For the heaviest applications with the highest lateral load requirements, the M165 may be more appropriate. Send us your rail profile and we'll advise.

A65
Crane Rail
A75
Crane Rail
A100
Crane Rail
A120
Crane Rail
60kg
Standard Rail
68kg
Standard Rail
MRS
Port Crane Rail
Other profiles?
Ask us
Applications

Where the M120 is Used

The M120 suits permanent installations on medium to heavy crane rail profiles where the base can be welded to the supporting structure. It is widely used in warehouses, fabrication facilities, ports and heavy industrial environments where higher lateral loads require a more substantial welded clip than the M71.

Primary Use
Medium to heavy duty overhead crane runways on A65 to A120 crane rail profiles
Rail Type
Crane rail A65 to A150, heavy standard rail 60kg and 68kg, MRS series
Industries
Ports and terminals, warehouses, fabrication facilities and heavy industrial environments
Connection Type
Friction connection, must be torqued to the prescribed specification
Maintenance
Pressure block is replaceable without replacing the full clip top assembly
Not sure?
Send us your rail profile and application and we'll confirm the right clip. Get in touch
Crane Rail Clip Range

Other Welded Rail Clips

Welded
M71
Light duty welded clip, smaller profiles
Welded
M165
Heavy duty welded clip, highest lateral loads
Bolted
CL4-20
M20 bolted alternative with adjustability
Bolted
CLX-20
M20 bolted, extended lateral adjustment
FAQ

M120 Rail Clip: Common Questions

What is the M120 crane rail clip used for?
The M120 is a two-part welded crane rail clip for medium to heavy duty crane rail installations. It suits A65 to A150 crane rail profiles, heavy standard rail (60kg, 68kg) and MRS series port crane rail. It provides higher lateral load capacity than the M71 and is widely used in warehouses, ports, fabrication facilities and heavy industrial crane runway applications.
What is the difference between the M120 and M71?
Both are two-part welded friction connection clips, but the M120 is larger and suited to heavier rail profiles with higher lateral load requirements. The M71 suits lighter profiles (A45 to A75) with lower lateral loads. If your crane rail is A65 or heavier, or if your application involves higher lateral loads, the M120 is generally the more appropriate choice. Send us your rail profile and application and we'll advise.
What is the difference between the M120 and M165?
Both the M120 and M165 are two-part welded friction connection clips suited to heavy crane rail, but the M165 is the larger clip with higher lateral load capacity. The M165 is specified for the most demanding applications where lateral loads exceed what the M120 can accommodate. For most standard heavy duty overhead crane installations, the M120 is sufficient. The M165 is typically reserved for ports, heavy industry and high-load applications.
What does friction connection mean for the M120?
The M120 transfers lateral loads through clamping force between the clip components and the rail foot. It must be tightened to the prescribed torque specification to achieve the correct lateral resistance. Under-tightening reduces the clip's load capacity, so accurate torquing during installation is essential.
Can the M120 pressure block be replaced?
Yes. The clip top incorporates a modular vulcanized synthetic pressure block that can be replaced when worn without replacing the entire clip top assembly. This reduces the cost of ongoing maintenance over the life of the installation.
How do I know if the M120 is the right clip for my application?
The M120 suits medium to heavy crane rail profiles from A65 upward where a permanent welded connection is appropriate. If your rail is lighter (A45 to A65 with low loads), the M71 may suffice. If your application involves very high lateral loads, the M165 may be more appropriate. Send us your rail profile, crane details and any drawings and we'll advise on the right clip.

Need M120 Rail Clips?

Send us your rail profile, application details or project drawings and we'll come back with a practical supply option.

Get a Fast Quote Call (07) 3339 3085

Let's talk: (07) 3339 3085

Scroll to Top
The product sheet will be available to download following submission of details below