60kg Standard Rail — AS 1085.1

An active AS 1085.1 standard rail profile, the 60kg rail is suited to mainline networks, industrial sidings, mining haulage and heavy overhead crane runways.

Get a Fast Quote View All Standard Rail Download Product Sheet
Standard Rail — AS 1085.1

60kg Standard Rail — Supplied Across Australia

Inform Rail supplies AS 1085.1 60kg standard rail for mainline networks, industrial sidings, mining haulage and heavy overhead crane runways across Australia.

The 60kg is an active profile under AS1085.1-2002 — one of only five profiles listed in the current standard. It is the second heaviest active profile in the range and suits demanding mainline, heavy industrial and crane runway applications where the 53kg is insufficient but the 68kg is not required. Matched fastening systems including clips, fishplates, sole plates and rail pads can be supplied to suit the profile and substructure.

60kg standard rail supplied by Inform Rail Australia
70mm
Head Width
170mm
Height
146mm
Foot Width
16.5mm
Web
60.6
kg / metre
AS 1085.1
Standard
Applications

Where 60kg Rail is Used

An active AS1085.1-2002 heavy rail profile suited to demanding freight and industrial applications. If you are unsure whether 60kg is the right profile, send us your details and we will advise.

Primary Use
Mainline network track, heavy industrial sidings and high-duty plant rail corridors
Crane Runways
Heavy crane runways, conveyor trippers and high-wear plant environments
Mining
Heavy mining haulage routes and ore transport corridors with high axle loads
Industrial Track
Major port terminals, heavy industrial sidings and high-capacity shunting operations
Replacement
Direct replacement for worn or damaged 60kg sections in existing installations
Not sure?
Send us your load, duty class and application and we will advise on whether 60kg or another section is appropriate. Get in touch
Fastening Systems

Compatible Clips for 60kg Rail

The 60kg profile is compatible with heavy duty welded and bolted rail clips. Clip selection depends on your substructure type, installation method and load requirements. Send us your details and we'll advise on the right system.

Welded
M71
Two-part welded clip for 60kg installations on steel substructures. Friction connection torqued to specification.
Bolted
CL4-16
M16 through-bolt bearing clip for 60kg installations where adjustability is required.
Bolted
CL4-20
M20 through-bolt bearing clip for 60kg installations where higher bolt capacity is specified.
Bolted
CLX-20
M20 extended adjustment clip for 60kg installations requiring wider lateral alignment tolerance.
Fastening System
Full System
Matched fishplates, sole plates, rail pads and hook bolts as a complete fastening system for 60kg installations.

Not sure which clip suits your 60kg installation? Send us your substructure details and application and we'll advise on the correct clip type, size and spacing.

Standard Rail Range

Other Standard Rail Profiles

41kg
Standard rail
47kg
Standard rail
50kg
Standard rail
53kg
Standard rail
68kg
Standard rail
FAQ

60kg Rail: Common Questions

What is 60kg standard rail used for?
60kg standard rail is used for heavy duty mainline freight corridors, mining haulage routes, major port terminals and heavy industrial crane applications. It is an active AS1085.1-2002 profile and the second heaviest in the standard range, suited to demanding applications where the 53kg is insufficient but the 68kg is not yet required.
What are the dimensions of 60kg rail?
60kg rail has a head width of 70mm, a height of 170mm, a foot width of 146mm and a web thickness of 16.5mm. The mass is approximately 60.6 kg per metre.
What is the difference between 60kg and 53kg rail?
The 60kg is an active AS1085.1-2002 profile while the 53kg is a legacy section absent from the current standard. Dimensionally, the 60kg is taller (170mm vs 151.7mm) with the same 146mm foot, giving it a higher section modulus and greater load capacity. The 60kg is suited to heavier duty applications; the 53kg is commonly found on existing regional freight and industrial infrastructure where like-for-like replacement is preferred.
What clips are compatible with 60kg rail?
Compatible welded clips for 60kg include the M120 and M165. Compatible bolted clips include the CLX-20 and CLX-24. Clip selection depends on the substructure type and load requirements.
Can 60kg rail be supplied cut to length?
Yes. 60kg rail is supplied in standard lengths of 12.19m and 13.72m and can be cut to your specified lengths prior to dispatch. Drilling to your bolt pattern is also available. Include your cutting and drilling requirements in your enquiry.
Can Inform Rail supply a complete 60kg fastening system?
Yes. We can supply matched 60kg rail clips, fishplates, sole plates, rail pads and hook bolts as a complete package. Send us your rail profile, substructure details and any drawings and we'll quote a complete fastening system. No minimum order applies.

Need 60kg Standard Rail?

Send us your requirements, drawings or application details and we'll come back with a practical supply option.

Get a Fast Quote Call (07) 3339 3085

Let's talk: (07) 3339 3085

Scroll to Top